Hazardous Location Duct – Smoke Ejector

Home/Smoke Ejector Accessories/Hazardous Location Duct – Smoke Ejector

Hazardous Location Duct

Hazardous Location Duct is specialized to conduct static charges away from the airflow.  Static buildup could create a spark that would compromise safety in explosive environments.

This duct comes with a built-in, easy to carry bag and can be attached to other duct as an extension by simply tightening the belted cuff.  This quick and easy process doubles the length of the duct without use of adapters that take up space, get lost, and take up time to install.

The duct consists of graphite fibers that conduct any charge that could build-up as a result of the airflow. Airflow through the standard duct builds up static charges much in the same way as walking across carpet does.

The special clip on the end of the duct must be connected to a grounding post that carries the charge back to earth ground – usually this is accomplished through the ground plug of the electric motor.

Hazardous Location Duct Sizes

Model Diameter Length
12x20HZ1 12″ – 305mm 20 ft – 6.1m
16x20HZ1 16″ – 406mm 20 ft – 6.1m
20x20HZ1 20″ – 508mm 20 ft – 6.1m
24x20HZ1 24″ – 610mm 20 ft – 6.1m
Download Spec PDF
Back to Smoke Ejector Accessories

Spiral Duct Specs

Material – Single ply neoprene impregnated polyester -UL94-V-O Flame Retardancy, NFPA701, California T-19

Structure – Class 1 Steel Spring Wire Helix (ASTM 227)

Wearstrips – Heavy duty vinyl with self adhesive neoprene backing, APX 25-27 oz Sq/Yd. Abrasion Resistance of 18,000 cycles from H-22 wheel with 1000 gram load (FSTM 191 Method 5306)

Conductivity – Rated to 100,000 ohms or less per square inch

Length – 20 ft – custom sizes available

Grounding – Product should be grounded on each end, with a solid means of connection. Grounding this product on one only will still provide a safe positive means of discharging static build-up.

For use with smoke ejectors, please see the duct adpater.

Hazardous Location Duct

The Hazardous Location Duct can also be used as an extension.  Need a longer duct to reach harder to get to places?  No problem, just attach two ducts together using the belted cuff.